a. Street layout in the subdivision;

b. Existing and tentatively approved street layout within 800 feet of the subdivision;

c. Zoning designations within, and adjacent to, the subdivision;

d. All property lines within 800 feet of the subdivision;

e. Streams or watercourses, and public facilities such as schools and parks;

f. All 100-year floodplain and designated shoreline boundaries in, and within 800 feet of, the proposed subdivision;

g. Any other pertinent information that will assist in locating the proposed subdivision.

a. The proposed name of the subdivision;

b. The scale of the drawing;

c. The date of the drawing;

d. The name and address of the engineer, surveyor or other individual responsible for laying out the subdivision.

a. North arrow;

b. The location, names and right-of-way widths of all existing and proposed streets and driveways within 250 feet of the boundaries of the proposed subdivision;

c. The location, names and right-of-way widths of all proposed streets and their proposed paved width;

d. Lot layout with lot line dimensions, the area in square feet contained in each lot;

e. The location and use of all existing buildings within the proposed subdivision, indicating which buildings are to remain and which are to be removed;

f. The use and approximate location of all buildings within 150 feet of the boundaries of the proposed subdivision;

g. The location, size and use of all contemplated and existing public areas within the proposed subdivision, and a description of the adaptability of the area for uses contemplated;

h. The location, size and kind of public utilities in and adjacent to the proposed subdivision, indicating those utilities which will provide service to the proposed development and their planned location within the subdivision to include any existing easements;

i. Location and disposition of any wells, creeks, drainage courses, drainageways, septic tanks, drainfields, 100-year floodplain boundaries and easements in or within 200 feet of the proposed subdivision;

j. Topography and five-foot contours certified by the engineer or surveyor within the proposed subdivision; or, as an alternative in the case of a partition of one acre or less, elevations at each existing and proposed property corner. One-foot or two-foot contours may be required, at the Community Development Director’s discretion;

k. Topography and at least 10-foot contours outside, but within 200 feet of, the proposed subdivision. The base for such information shall be the National Geodetic Survey (USGS), or other survey approved by the Community Development Director;

l. The location of all significant trees (as defined in the Lakewood Zoning Code) within the proposed subdivision, and for 150 feet beyond the terminus of all dead-end streets. (Individual trees in a stand of five trees or more need not be shown, but the area covered by the stand dripline shall be shown.) For trees outside the subdivision boundaries, the location of said trees may be based on aerial photographs or other methods acceptable to the Community Development Director, and which do not require the applicant to trespass on adjacent property;

m. For all 100-year floodplain boundaries shown on the vicinity map, the elevation of the 100-year flood at the point immediately upstream from the subdivision, and the direction and distance to said point;

n. The location of identified hazards or development limitation areas identified by the City of Lakewood critical areas map;

o. The location of any state shorelines and associated wetlands within the subdivision, as defined by state law and the City of Lakewood Shoreline Master Program.