A. LMC 18A.60.030 and LMC 18A.60.040 contain general density and dimension standards for the various zones. Methods for measuring these standards are set forth in LMC 18A.60.090 through 18A.60.120.

B. The area and dimension standards are arranged in a table for each of two (2) general land use categories:

C. Development standards are listed down the left side of both tables, and the zones are listed at the top. The matrix cells contain the area and dimensional requirements of each zone. All dimensions are measured in lineal feet, and all areas are measured in square feet. The parenthetical numbers in the matrix identify specific requirements or other information which is set forth following the matrix. [Ord. 726 § 2 (Exh. B), 2019.]