Skip to main content
Loading…
This section is included in your selections.

A. Development Standards Table.

Industrial Zoning Classifications

IBP

I1

I2

Lot size

One acre

20,000 GSF

20,000 GSF

Building coverage

All building coverage and impervious surface maximums stated herein for the Industrial zoning districts may be reduced at the time they are applied to individual properties, because of storm water requirements.

Impervious surface

The maximum building and impervious surface coverage and impervious surface for the Industrial zoning districts shall be 100%.

Setbacks

The minimum distance setbacks for the Industrial zoning districts shall be as follows, except where increased setbacks due to landscaping or building/fire code requirements apply.

Front yard/street setback

10 feet

0 feet

0 feet

Principal arterial and state highway setback

25 feet

25 feet

25 feet

Rear yard setback

0 feet

0 feet

0 feet

Interior setback

0 feet

0 feet

0 feet

Building height

60 feet

60 feet

60 feet

Design

Design features shall be required as set forth in Chapter 18A.70 LMC, Article I.

Landscaping

Landscaping shall be provided as set forth in Chapter 18A.70 LMC, Article II.

Tree Preservation

Significant tree identification and preservation and/or replacement shall be required as set forth in Chapter 18A.70 LMC, Article III.

Parking

Parking shall conform to the requirements of Chapter 18A.80 LMC.

Signs

Signage shall conform to the requirements of Chapter 18A.100.

[Ord. 726 § 2 (Exh. B), 2019.]