Skip to main content
Loading…
This section is included in your selections.

Except where these regulations and the Engineering Standards Manual provide otherwise, design detail, construction, and materials shall be in accordance with the following publications’ current editions:

A. A Policy on Geometric Design of Highways and Streets, published by the American Association of State Highway and Transportation Officials.

B. Design Manual, published by the Washington State Department of Transportation.

C. Highway Runoff Manual, published by the Washington State Department of Transportation.

D. Manual on Uniform Traffic Control Devices (MUTCD), published by the U.S. Department of Transportation as adopted and amended by the state of Washington.

E. Pierce County Stormwater Management and Site Development Manual.

F. Soil Survey of Pierce County Area, Washington, published by the Natural Resources Conservation Service, U.S. Department of Agriculture.

G. Standard Plans for Street, Bridge and Municipal Construction, published by the Washington State Department of Transportation.

H. Standard Specifications for Highway Bridges, published by the American Association of State Highway and Transportation Officials.

I. Standard Specifications for Street, Bridge and Municipal Construction, published by the Washington State Department of Transportation and the Washington State Chapter of the American Public Works Association.

J. Stormwater Management Manual for Western Washington, published by the Washington State Department of Ecology, and including Appendix 1 of the Western Washington Phase II Municipal Stormwater Permit, or approved equivalent.

K. Trip Generation Manual, published by the Institute of Transportation Engineers.

L. Highway Capacity Manual, published by the Transportation Research Board.

M. WSDOT Pavement Guide, published by the Washington State Department of Transportation.

N. ADA Accessibility Guidelines, published by the United States Access Board. [Ord. 501 § 3, 2009.]