12.06.010 Record (as-built) drawings.
Record drawings (sometimes referred to as “as-built” drawings) shall be required for all development as deemed necessary by the City Engineer. A full-size set of record drawings shall be reviewed, edited (e.g., strike-throughs, clouds, etc.), stamped, and signed by a licensed professional engineer or surveyor, and submitted prior to the City’s acceptance of any improvement. Along with a hard copy, a digital copy of the record drawings produced using AutoCAD software (most recent edition) shall also be provided to the City. Each sheet of the record drawings shall include the following statement located at the bottom right-hand corner of the sheet when possible:
“These plans are record drawings and the information shown accurately reflects existing field conditions as of this date: _____________.”
The following, as applicable, shall be included in all record drawing submittals:
A. Roadway centerline stationing at minimum 50-foot spacing. Stationing shall include elevations and horizontal control in state plane coordinates.
B. Right-of-way lines and property lines.
C. Locations, widths, and composition of travel lanes, sidewalks, curbs, gutters, medians, planter strips, irrigation systems, shoulders and bike lanes.
D. Street light locations and types.
E. Utility locations.
F. Street names.
G. Pavement markings and street signs.
H. Type and widths of easements.
I. Catch basin type, location, rim elevation, bottom elevation, and inlet/outlet invert elevation.
J. Storm drain pipe size, composition, location, and invert slope.
K. Detention/retention/infiltration facility location, and inlet/outlet locations and elevations. [Ord. 501 § 3, 2009.]