18A.60.050 Industrial area and dimensions.
A. Development Standards Table.
Industrial Zoning Classifications |
|||
---|---|---|---|
IBP |
I1 |
I2 |
|
Lot size |
One acre |
20,000 GSF |
20,000 GSF |
All building coverage and impervious surface maximums stated herein for the Industrial zoning districts may be reduced at the time they are applied to individual properties, because of storm water requirements. |
|||
Impervious surface |
The maximum building and impervious surface coverage and impervious surface for the Industrial zoning districts shall be 100%. |
||
Setbacks |
The minimum distance setbacks for the Industrial zoning districts shall be as follows, except where increased setbacks due to landscaping or building/fire code requirements apply. |
||
Front yard/street setback |
10 feet |
0 feet |
0 feet |
Principal arterial and state highway setback |
25 feet |
25 feet |
25 feet |
Rear yard setback |
0 feet |
0 feet |
0 feet |
Interior setback |
0 feet |
0 feet |
0 feet |
60 feet |
60 feet |
60 feet |
|
Design |
Design features shall be required as set forth in Chapter 18A.70 LMC, Article I. |
||
Landscaping |
Landscaping shall be provided as set forth in Chapter 18A.70 LMC, Article II. |
||
Tree Preservation |
Significant tree identification and preservation and/or replacement shall be required as set forth in Chapter 18A.70 LMC, Article III. |
||
Parking |
Parking shall conform to the requirements of Chapter 18A.80 LMC. |
||
Signage shall conform to the requirements of Chapter 18A.100. |
[Ord. 726 § 2 (Exh. B), 2019.]